Data story · Critical areas
How much of Newcastle sits on a mapped hazard area?
The City publishes four critical-area layers: landslide deposits, liquefaction susceptibility, steep slopes in stream buffers and wetland buffers. Together they cover 9.8% of the city. They reach into 345 parcels, yet only 69 address points sit inside one: most of the flagged ground is ravine, greenbelt and buffer at the back of lots.
- 9.8%
- of the city's 4.5 sq mi lies in a mapped critical area
- 345 of 3,850
- parcels have part of their land in one
- 69 of 3,797
- address points fall inside one
Where the mapped hazard areas are
Layer by layer
- Mapped landslide deposit
- Land
- 2.4%
- Parcels
- 89
- Addresses
- 54
- Moderate-to-high or high liquefaction susceptibility
- Land
- 0.5%
- Parcels
- 14
- Addresses
- 0
- Slope over 30% in a stream buffer
- Land
- 0.1%
- Parcels
- 4
- Addresses
- 0
- Wetland buffer
- Land
- 7%
- Parcels
- 257
- Addresses
- 17
Flagged parcels, by land use
Parcels with at least 10 m² (and 1% of the lot) inside a critical area.
- Single Family178 of 3,307 (5.4%)
- Vacant51 of 122 (41.8%)
- Critical Area Tract31 of 75 (41.3%)
- Public Open Space26 of 62 (41.9%)
- Public Park25 of 49 (51.0%)
- City Owned10 of 18 (55.6%)
- Not recorded9 of 51 (17.6%)
- Stormwater6 of 51 (11.8%)
178 of 3,307 single-family lots (5.4%) have some mapped critical area on them; vacant land, critical-area tracts and public open space are far more likely to be flagged.
Read with care
- Wetland buffers and stream-buffer slopes are marked “unverified” by the City.
- Landslide deposits come from the Washington Geological Survey, mapped at a regional scale. A flag here is a reason to check, not a finding about a property.
- Liquefaction counts only “moderate to high” and “high” ground. No address point falls in either; most of the city is “very low” or bedrock.
- The layers were last edited in 2019 and 2020 on the City’s Hub.
How we worked this out
- Sources: Mapped landslide deposit, Moderate-to-high or high liquefaction susceptibility, Slope over 30% in a stream buffer, Wetland buffer, plus Parcels, AddressPoints, Zoning Districts and City Boundary.
- Areas are measured in meters (UTM zone 10N), after cutting each layer to the city boundary.
- Each address string counts once (a few repeat in the address layer).
- The figures are computed from the published data when this site is built, not typed in by hand.
